- General Information
- Manufacturer
- Tripp Lite by Eaton
- Manufacturer Website Address
- https://tripplite.eaton.com/
- Brand Name
- Tripp Lite by Eaton
- Product Line
- SmartPro
- Product Type
- Line-interactive UPS
Protects Mission-Critical Rack-Mounted Equipment
- Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
- Audible alarm signals loss of utility power, overload and low battery
- 6 NEMA 5-15R outlets
- 10 t. (3.1 m) power cord with 120V NEMA 5-15P input
- 450-joule surge suppression rating
- Supports half load up to 14 min. and full load up to 4 min.
- Internal batteries designed for hot-swap field replacement
- 2 load banks, each with one outlet individually controllable via software interface to reboot equipment or shed nonessential loads
- Maintains 120V nominal output over input range of 83V-147V without using battery power
- Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance
- 99% line mode efficiency saves money, energy and protects the environment
- Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX and SNMPWEBCARD
- USB and DB9 ports combine with PowerAlert software (available via free download from www.tripplite.com/poweralert) to monitor operating conditions, monitor AC power, and enable safe unattended system shutdown and file saves in case of a prolonged power failure
- EPO port supports emergency shutdown in large facilities
- Hardware included for mounting in 1U of EIA-standard 19 in. 2- or 4-post rack
- Optional 4POSTRAILKIT1U accessory available for extra support in 4-post installations
- Compatible with vertical mount cabinets
- Warranty
- Limited Warranty
- 2 Year
- Technical Information
- Plug/Connector Type
- NEMA 5-15P
- Receptacle Type
- NEMA 5-15R
- Receptacle Detail
- 6 x NEMA 5-15R
- Transfer Time
- 5 ms
- Application/Usage
- Data Center
- VoIP Phone System
- Computer
- Power Description
- Load Capacity (VA)
- 1000 VA
- Load Capacity (Watt)
- 800 W
- Input Voltage
- 120 V AC
- Output Voltage
- 110 V AC
- 115 V AC
- 120 V AC
- Waveform Type
- Pure Sinusoidal
- Battery Information
- Backup/Run Time (Full Load)
- 4 Minute
- Typical Battery Recharge Time
- 4.50 Hour
- Hot Swappable
- Yes
- Physical Characteristics
- Height
- 1.7"
- Width
- 17.5"
- Depth
- 16.7"
- Rack Height
- 1U
- Form Factor
- Rack-mountable
- Weight (Approximate)
- 31.99 lb
- Miscellaneous
- Package Contents
- SmartPro 1000RM1U UPS
- SMART 1000RM1U UPS System
- Mounting hardware
- Cabling for USB & DB9 monitoring and EPO switching
- PowerAlert unattended shutdown and UPS/Power monitoring software
- Warranty information and instruction manual
- Country of Origin
- China
- Environmental Compliance
- Restriction of Hazardous Substances (RoHS)
