Eaton Tripp Lite Series Component Video + Audio over IP Extender/Receiver, Cat5e/6, Serial and IR Control, 1080i, 328 ft. (100 m), TAA

  • Part: 1402217
  • Model: B160-100-CSI
$180.00

Availability

Out of Stock

The B160-100-CSI RGB Component Video + Audio over IP Extender Receiver works with a Tripp Lite B160-Series transmitter (sold separately) to extend and distribute component video + stereo audio, RS-232 serial and IR (infrared) remote signals from the source to the display located up to 328 feet (100 meters) away, which is more than 200 feet farther than a traditional Cat5e/6 solution. By adding a chain of low-cost unmanaged network switches, such as Tripp Lite's NG5, you can continue extending the distance between source and display up to 328 feet per switch.

Create a multi-in, multi-out installation with up to 64 transmitters and 255 receivers by connecting dedicated managed Ethernet network switches with Internet Group Management Protocol (IGMP), such as Tripp Lite's NSS-G16D2. With a compatible B160-Series transmitter, this receiver works with any analog or digital source, including HDMI, VGA and DisplayPort™, allowing you to mix and match technologies and use existing source devices. An IGMP-enabled switch will let you manage all connections for centralized control over which sources show on which displays.

The B160-100-CSI supports video resolutions up to 1080i. It extends IR control signals that control a source, such as a Blu-ray™ player, from a remote display, as well as RS-232 signals at serial baud rates up to 57600 Bps. It mounts to a wall, rack or pole using the included hardware.

Features

RGB Component Video + Stereo Audio, Serial and IR Control Signals over Cat5/6 Cabling

  • Receives IP-based audio + video transmitted point-to-point from a source 328 ft. away
  • Add low-cost network switches between transmitter and receiver to continue extending distance up to 328 ft. per switch


Create a Multi-In, Multi-Out Installation Using B160-Series Transmitters and Receivers

  • Connect up to 64 transmitters and 255 receivers through multiple dedicated managed network switches
  • IGMP-enabled switches allow centralized control over which sources show on which displays
  • Displays video from any analog or digital source, so you can mix and match technologies and use existing sources and monitors


Enhanced Technical Features

  • Supports video resolutions up to 1080i
  • Uses H.264 video compression standard
  • Transmits on 20-60 kHz IR frequency
  • Extends IR control signals that control a source from a remote display
  • Supports RS-232 serial baud rates up to 57600 Bps


Plug-and-Play Functionality

  • No software or drivers required
  • Hardware included for mounting on wall, rack or pole
  • Compatible with all Tripp Lite B160-Series A/V over IP transmitters


TAA-Compliant

  • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

More from the Manufacturer

  • General Information
    • Manufacturer
    • Tripp Lite by Eaton
    • Manufacturer Website Address
    • https://tripplite.eaton.com/
    • Brand Name
    • Tripp Lite by Eaton
    • Product Type
    • Video Extender Receiver
  • Warranty
    • Limited Warranty
    • 1 Year

  • Technical Information
    • Connectivity Technology
    • Wired
    • Number of Output Devices Supported
    • 1
    • Maximum Operating Distance
    • 328.08 ft
  • Video
    • Graphics Modes
    • WUXGA
    • Maximum Video Resolution
    • 1920 x 1200
  • Interfaces/Ports
    • Network (RJ-45)
    • Yes
    • Number of Network (RJ-45) Ports
    • 1
  • Media & Performance
    • Media Type Supported
    • Twisted Pair
    • Twisted Pair Cable Standard
    • Category 6
  • Physical Characteristics
    • Color Family
    • Black
    • Product Color
    • Black
    • Receiver Height
    • 1.17"
    • Receiver Width
    • 5.04"
    • Receiver Depth
    • 3.94"
    • Form Factor
    • Rack-mountable
    • Receiver Weight (Approximate)
    • 1.59 lb
  • Miscellaneous
    • Package Contents
      • Receiver Unit
      • External Power Supply (Input: 100-240v, 50/60 hz, 0.5a; Output: 5v 2A)
      • Plug Adapters for U.S., U.K., Europe and Australia
      • IR-In Cable
      • 3.5 mm to db9 Adapter Cable (m/m)
      • Mounting Hardware
      • Owner's Manual
    • Country of Origin
    • Taiwan
    • TAA Compliant
    • Yes
    • Environmentally Friendly
    • Yes
    • Environmental Compliance
    • Restriction of Hazardous Substances (RoHS)

You Might Also Like